THE IMAGE BOX

MODIFY THE IMAGE SIZE:

Enlarge/reduce the image sizes:

Select the “Image Box”:

a: Click the “Image Box” or, from menu "Select Component", select "Photo".
b: Once selected, the “Image Box” will show an anchor point.
c: Enlarge/reduce with the mouse left key depressed whilst on the anchor point.
.

Note: The “Image Box” size is displayed in the bottom left panel.

Set the “Image Box”:

a: Click the “Image Box”.
b: Move the “Image Box” with the mouse left key depressed on any point of the “Image Box”.

Automatic alignement of the “Image Box” on the “Swf Display”:

a: Mouse-click on the "Image Box” to select it.
b: Mouse-click on buttons to align or center the “Image Box”.

Modify image ratio (horizontal or vertical):

a: Mouse-click on the "Image Box” to select it.
b: In the right panel, use the box "Image Ratio".
c: Select 4/3 if you have only or mostly horizontal-format images.
d: Select 3/4 if you have only or mostly vertical-format images.

Show/Hide the “Prev/Next” buttons:

Using this option, the image advancement buttons are shown in the bottom right and bottom left of the “Image Box”.

a: Mouse-click on the "Image Box" to select it.
b: In the right panel, use the box "Prev/Next Button”.
b: Click the check-box to enable/disable the option.

NOTE: This option is enabled by default. The space occupied by these buttons is not shown in the Sw work area so, when this option is used, leave free spaces of 15/20 pixels in the bottom right and in the bottom left of the “Image Box” (see picture above).

FLASH TEMPLATE COMPOSITION WITH IMAGES ONLY:

Activate this option to create a Flash slideshow with images but without miniatures.

In the box "Composition with images only"
a: Click the check-box to enable/disable the option.